Best Technocrate India Private Limited
Best Technocrate India Private Limited
Chhani, Vadodara, Gujarat
SEND SMS
SEND EMAIL

Welding Inverter

Providing you the best range of arc welding inverter, portable spot welding inverter, ac dc welding inverter, air gouging welding inverter, mig welding inverter and saw welding inverter with effective & timely delivery.

ARC Welding Inverter

ARC Welding Inverter
  • ARC Welding Inverter
Get Best Quote
Approx. Price: Rs 40,000 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
High duty cycle60% at 40 Degree C
Voltage fluctuation range415+/- 15% V
ARC force adjustment controlWith a range from 0-100A
ARD function, Hot Arc Ignition FunctionWith a present hot arc current from 0 to 135A
Adaptable to different kinds ofAcid and basic electrodes
NoisesLight,Small,High Efficiency,and fewer Noises

Adapted powerful MOSFET to change the supply frequency of 50/60Hz to high frequency (up to 100kHz) and then to come down the voltage as well as to change the AC current to DC current by the circuit, and eventually to turn out the powerful DC supply under the support of the PWM adjustment technology; in such an inverter design circuit, the weight and volume of the main transformer comes down dramatically, and its efficiency is over 30% increased instead

Features:
  • Auto-Compensation-Function as to the power supply fluctuation, strong adaptability of anti-power-supply fluctuation and stable welding current
  • Over-Voltage, Over-Current, Over Heat Auto-Protection Functions
  • Excellent Arc Force Compensation Function
  • Reliable, Light and Small with High-Efficiency & High Energy Savings
  • Adaptable to the welding application in different kinds of acid or basic electrodes
  • Adaptable to the welding application on different kinds of low carbon steels, medium carbon steels, and alloy-steels
  • Adapted in the IGBT Uni-Transistor Driving & Protection Technology, which enhances reliability and life cycle of the products

 

Technical Specification:

PARAMETERSARC200ARC250ARC400ARC600
Input Voltage (V)AC220±15%AC415V±15%AC415V±15%AC415V±15%
(1 phase), 50/60Hz(3 phases), 50/60Hz(3 phases), 50/60Hz(3 phases), 50/60Hz
Rated Input Current (A)43.614.427.735
Output Current Range (A)10~20010~25030~40050~630
Rated Output Voltage (V)28303644
Duty Cycle (%)60606060
No-Load Voltage (V)58606276
No-Load Loss (W)406080200
Efficiency (%)80858585
Power factor0.730.930.930.93
Insulation classFFFF
Protection classIP21IP21IP21IP21
Weight (kg)8172254
Dimensions (mm)400×153×291455×202×372515×262×468685×302×660
Request
Callback
Yes! I am Interested

Portable Spot Welding Inverter

Portable Spot Welding Inverter
  • Portable Spot Welding Inverter
Get Best Quote
Approx. Price: Rs 35,000 / UnitGet Latest Price

Product Details:

Output Current10-200 A
ModelMini Spot
Input Supply220VAC. 50Hz,Single Phase
Input KVA4 At max current
Weld TimeDigital timer
Welding Capacity0.2 -1 mm. M.S Sheet to sheet and sheet to pipe
Welding GunGas cooled gun with 4 mtr long lead
Earthing LeadLead fitted with clamp,2.5mtr
Gas RequirementArgon Gas ( customer scope)

The inverter-based portable mini spot welder is a specially designed spot welding machine, suitable for single side spot welding on different thickness sheets of mild steel & stainless steel with the help of specially designed spot welding gun. The machine is designed for jobs that can’t be accommodated in conventional type spot welding machines due to throat depth limitations or bigger size of jobs.

Application: Such as stiffener on steel Almira door, Fitting of shelves in a Steel Almira, welding of the sheet on square or round pipes. Welding of the sheet on hollow structures cladding of SS sheet on MS sheet or structures.
Request
Callback
Yes! I am Interested

AC DC Welding Inverter

AC DC Welding Inverter
  • AC DC Welding Inverter
Get Best Quote
Approx. Price: Rs 42,000 / UnitGet Latest Price

Product Details:

FeatureGood looking weld,deep melting and low electrode consumption
Self-diagnostic functionWith error code display
Excellent weld seam quality can be achievedDue to its effect on all important areas of the weld
Easy toARC starting,Stable ARC,High Performance
Adjustable argon stoppingTime of lag,current descending time and the current of stopping arc
Improve theTIG welding performance
Recommended base metalsMild steel,Copper,Titanium,Aluminium. Al-Mg Alloy

Specification:
PARAMETERSTIG315P AC/DCTIG500P AC/DC
Input Voltage (V)AC415V±15%AC415V±15%
(3 Phases), 50/60Hz(3 Phases), 50/60Hz
Rated Input Current (A) MMA / TIG13.618.2 / 13.1
Output Current Range (A)5~31510~500
Arc Force (A)----
Rated Output Voltage (V) MMA / TIG22.636
Duty Cycle (%)8585
No-Load Voltage (V)6060
No-Load Loss (W)4068
Efficiency%8585
Power Factor0.930.93
ARC StartingHFHF
Insulation ClassFF
Protection ClassIP21IP21
Weight (kg)3430
Dimensions (mm)560x364x302515x263x440
Request
Callback
Yes! I am Interested

Air Gouging Welding Inverter

Air Gouging Welding Inverter
  • Air Gouging Welding Inverter
Get Best Quote
Approx. Price: Rs 45,000 / UnitGet Latest Price

Product Details:

Phase3 Phase
ModelIWI-G -800,IWI-G -1000
Insulation ClassF
Supply Voltage380-440V
Type of CoolingForced Air
Open Circuit Voltage16-52 V
Primary Current at Max. Output10A
Welding Current 60% Duty Cycle800A,1000A
KVA Rating42,52
Welding Cable Section Cu110,120 mm2

Air Gouging Welding Inverter Sturdy & proven construction to withstand extra-ordinary welding environments. Fully solid state infinitely variable current setting over the entire range from 10 Amps to rated current, automatic current stabilization, offers fingertip control over the entire range. Spatter less welding and offers ideal welding results speedily with easy operation. Prevention of Electrode freezing and minimum weld cleaning with initial surge facility to start welding from deep penetration. PCB's are housed in steel enclosure for additional protection preventing the damages. Fitted With Amps & Voltmeter for direct reading of welding parameters.

Features:
  • Simple operation
  • Extra smooth arc
  • Automatic current stabilizing
  • Prevention of electrode freezing
  • Modular design
  • No breakdowns
  • Minimum maintenance
  • High efficiency
  • Energy saving
  • Low running cost  
Request
Callback
Yes! I am Interested

MIG Welding Inverter

MIG Welding Inverter
  • MIG Welding Inverter
Get Best Quote
Approx. Price: Rs 48,000 / UnitGet Latest Price

Product Details:

ModelIWI-MIG250, IWI-MMA/MIG400, IWI-MMA/MIG600
Input VoltageAC415V+-15%, 3 phase, 50/60Hz
Rated Input Power Capacity11.3, 13.9, 24.7 KVA
Output Current Range50-250, 50-400, 80-500 A
Rated Output Voltage (V)26.5, 34, 39
Duty Cycle (%)60
Efficiency (%)80, 85
Power Factor0.73, 0.93
Wire Feed Speed (m/min)2.5-18, 3.0-24
Insulation ClassF
Protection ClassIP21
Weight (kg)9, 36, 42
Mig wire usedOnly 0.8, 0.8/1.0/1.2, 0.8/1.0/1.2/1.6
Dimensions (mm)371x153x232, 550x280x545, 650x310x640
Drive System2-Roll, 4-Roll
Wire Drive MotorPermanent Magnet DC Motor
Wire Feed Speed1.2-18 Mtr / min
Feeder And Cable Assembly8 Kg.

Features:
  • Much smaller & lighter by comparison to the transformer welding machine; its medium frequency inverter transformer inside is much lighter than the traditional transformer; in total, its weight is only within a range from 1/5 to 1/10 of the weight of the transformer welding machine and around 1/3 of the transformer welding machine in volume
  • Both Arc and MIG can be used using one machine.
  • High efficiency and energy savings; due to a much smaller volume, the raw materials of copper and steel needed are much less consumption, and there is much less non-contribution energy consumption while current runs through; its power usage efficiency is up to 80 – 85%, its power factor is up to 0.93; and the energy consumption saving is up to 1/3 in total by comparison to the transformer welder
  • Digital display, current & voltage preset function
  • Continuous adjustment function of the welding current & voltage with a sufficient wide adjustment range
  • Capable of formatting a good seam shape on the opposite side while making a backing weld
  • Adapted an instant wire feeding circuit design, much more stable in wire feeding by comparison to the traditional instant voltage wire feeding mode, capable of achieving highly stable wire feeding within the full range of current adjustment
  • Highly stable during the welding process with soft & smooth melted drop transferring so as to assure a nice and smooth seam shape Built in a unique electronic inductance, capable of precisely control the short-cut melted drop transfer and the mixed transfer processes as well; capable of precisely changing the status of arc stiffness through adjusting the knob of electronic inductance to meet the different characteristic requirements according to the user’s different requirements.
Request
Callback
Yes! I am Interested

SAW Welding Inverter

SAW Welding Inverter
  • SAW Welding Inverter
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price

Product Details:

Phase3 Phase
ModelIWI-MZ630,IWI-MZ1000,IWI-MZ1250
Arc Force0-100 A
Insulation ClassF
Protection ClassIP21
Dimensions670x337x570,753x380x770 Kg.
Input VoltageAC415V +- 15%
Current Adjustment Range50-630,112-1000,112-1250 A
No-Load Voltage (V)72,76V
Rated Output Voltage44 V
No-Load Power Loss300 W
Duty Cycle60%
Efficiency80%
Power Factor0.93

Features:
  • Multiple Function Machines; Capable of well performing the Submerged Arc Welding, MMA Welding, and Carbon-gauging Functions
  • Advanced Design with a Built-in Triple Prevention Function; Highly reliable in its performance and capable of well performing in different kinds of working environments
  • Adapted the Most Advanced Control Circuit Design; Its Technological Indices Indicates a First Class Position in the Industry
  • Excellent Welding Performances; Strong & Durable; Capable of Assuring a Deep Welding Pool and a Good Seam as well
  • Extensively Applied in the Auto Welding Application on the Large Pressure Containers of Carbon Steels, Alloy Steels, and Stainless Steels, and on the Large Metal Structures
  • Built-in Over-Heat, Over-Current, Over-Voltage and Less-Voltage Protection Circuit, Safe Operation Assurance
Request
Callback
Yes! I am Interested

TIG Welding Inverter

TIG Welding Inverter
  • TIG Welding Inverter
Get Best Quote
Approx. Price: Rs 38,000 / UnitGet Latest Price

Product Details:

ModelIWI-MMA/TIG200,IWI-MMA/TIG250,IWI-MMA/TIG400,IWI-MMA/TIG600,IWI-TUBEMILL600
Input VoltageAC220V+-15% (1 Phase),50/60Hz
Output Current Range (A)7-200,7-250,10-400,10-600
Arc Force (A)0-100
Rated Output Voltage (V) MMA / TIG28 / 18,30 / 20,36 / 26
Arc InitiationHigh frequency
Duty Cycle (%)60,100
No-Load Voltage (V)56,60,68
No-Load Loss (W)40,60,100
Efficiency%80,85
Power Factor0.73,0.93
Weight (Kg)9,19,30,42,58
Dimensions (mm)395x153x301,505x203x375,515x263x440
Rated Input Current (A) MMA / TIG43 / 28,14.4 / 9.6,18.2 / 13.1

Features:
  • Designed in the advanced inverter technology with high working frequency; small, light and very convenient to carry on
  • High-Frequency Increased-Voltage & Pulse Hot Arc Ignition Design; Excellent Welding Performances vs Costs Advantages
  • Over Voltage & Over Current Auto-Protection Functions
  • Unique Output Characteristic Design; especially adaptable to the wire-filled welding process, and capable of assuring a nice and smooth seam
  • Wide range of welding voltage, strong adaptability as to the power supply with high duty cycle, especially adaptable to be continually working operation in the factory
  • Well-organized structure, built through excellent manufacturing processes, reliable, durable and easy to maintenance
  • Adaptable to the welding application on the stainless steels, carbon steels, and coppers etc.
  • Multiple Functions and Adjustments Design, capable of satisfying high-quality welding requirements
  • Current-Segment Adjustment Design, Start Current, Base Current, Welding Current, Up-slow Time, Down-slow Time, Closing Current, Post-Gas Blow Time can be freely set up
  • Multiple Pulse Adjustment Functions; Capable of generating an excellent welding seam; Quick up or down in the pulse current change, especially adaptable to the welding application in the bicycle manufacturing
  • 2T/4T/Repeat Functions, highly support the welding operators
  • Water-cool torch, high duty cycle, and adaptable to the welding application in the large-scale production lines
  • MMA & TIG functions, adaptable to the high-quality welding application in the different kinds of metals
  • Adaptable to the welding application on the stainless steel, carbon steel and copper and so on.
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Mahesh Mohta (Director)
No. 33-35, Mansarovar Complex, Opp - Chhani Gurudwara, Chhani
Vadodara- 391740, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS